10X RUST
Rust Dissolver
10X RUST safely removes rust, corrosion and oxide coatings, returning surfaces to bare metal without compromising the underlying material. Its viscous, ready‑to‑use formula acts like an acid but is safe for skin and most metals, and it won’t harm plastic, rubber, seals, soft metals or well‑adhered coatings like paint and chrome. Because the solution is reusable, it offers a quick and economical way to restore tools, parts and surfaces—ideal for any component that can remain damp until the rust is gone.
How it Works
- Acid‑like performance without the hazards: A low‑pH organic salt dissolves rust and corrosion without the risks associated with strong acids.
- Preserves surface integrity: Restores rusted surfaces to bare metal without damaging plastics, rubber seals, soft metals or existing coatings.
- Reusable formula: Can be stored and reused until its rust‑dissolving power diminishes.
- Ready to use: No dilution required—though it can be diluted by up to 10 % water if desired.
- Safe on metals: Works on all metals; dwell time should be limited on soft metals.
- Leaves non‑oxide coatings intact: Well‑adhered paint, chrome and other finishes remain unaffected when used as directed.
A Proactive, Biological Drain Program
- Remove excess oil and dirt; rinse and dry.
- Use a wire brush to remove flaking and large rust deposits.
- Immersion: Submerge the item fully or partially in a plastic pan or tub; check progress until the rust has dissolved.
- Brushing: Coat the surface with a foam applicator or paintbrush, keeping it damp until the rust is gone.
- Stiff brush or grill pad: Apply the solution and agitate with a brush or pad; rinse and dry. Follow with 10X Rust Blocker to prevent future corrosion.
- Pump system: For large areas, apply using a catch‑and‑return system with a small submersible pump.
- Temperature: For best results, apply in temperatures above 50 °F.
Performance Advantages
10X RUST delivers rapid, acid‑like rust removal without the dangers of harsh chemicals. It dissolves rust, corrosion and oxide coatings down to bare metal while preserving plastic, rubber, seals and existing finishes. The ready‑to‑use, reusable formula can be applied via immersion, brushing or pump systems, requires no dilution and is versatile enough for a variety of metals and coatings. Fast‑acting and economical, 10X RUST makes rust removal safe and efficient while minimizing downtime and disposal concerns.
Frequently Asked Questions
How long does it take? Light rust may dissolve in 30–60 minutes; moderate rust up to 4 hours; heavy rust up to 12 hours.
Can it be reused? Yes—store and reuse until it becomes less effective.
Do I need to dilute it? No, it’s ready to use, but you can add up to 10 % water if needed.
Is it safe for all metals? Yes, though dwell time on soft metals should be limited.
Will it affect coatings? Well‑adhered paint and other non‑oxide coatings remain intact; test a small area first.
How much will one quart de‑rust? It depends on the amount of rust removed; heavier use shortens its life.
Does it remove paint? It won’t remove well‑adhered paint; wipe off quickly if you want to keep the finish.
Why does it foam? Soft metals can cause foaming, and pump systems may also introduce foaming.
How do I dispose of it? Most used solution can be put down the drain; avoid storm sewers and follow local regulations.